Vælg venligst erhverv eller privat
Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her

Hurtig levering

95% af alle ordrer leveres fra dag-til-dag

Fri fragt

Fri fragt på alle ordrer over 499 excl. moms

+30.000 produkter

Stort udvalg af markedets bedste produkter.


Tom Indkøbskurv

ABUS AZWG10020 - kommunikationsmodul

Forsiden / ABUS AZWG10020 - kommunikationsmodul
ABUS AZWG10020 - kommunikationsmodul (AZWG10020)
ABUS AZWG10020 - kommunikationsmodul (AZWG10020)
ABUS AZWG10020 - kommunikationsmodul (AZWG10020)
ABUS AZWG10020 - kommunikationsmodul (AZWG10020)

ABUS AZWG10020 - kommunikationsmodul

Varenr.:
AZWG10020
EAN:
4043158053722
  • Type Hjem / Sikkerhed
3.921,25
3.137,- ekskl. moms
Antal:
Beskrivelse

- Enables communication to and from the alarm system via landline/cellular network
- Text and voice messages via landline (PSTN) and cellular communication (GSM)
- Alarm and status messages to up to 10 stored telephone numbers
- Redundant communication channel (PSTN/GSM) to maximize transmission security.
- Remote access via telephone for worldwide operation when out and about
- Integrated listening and speaking for simple on-site interaction
- Inbox function for forwarding messages (e.g. prepaid credit)
- Can be used independently of alarm system (building management system, industry)
The dialer for voice and text messages acts as the link between wired alarm system and telephone. It receives system alarm and status messages and reads these out as voice (stored automated voice message) or text (SMS).
Silent alarm via telephone
In the event of an alarm, the alarm system can trigger sirens, for example, or sends a silent alarm via telephone. The silent alarm is forwarded to the telephone network via the dialer. 8 events are available via the wired inputs (e.g. intrusion, break-in, medical emergency, fire) each is assigned its own event text (SMS or automated voice message). In addition to this, a location message with general information (name, address) is transmitted.
8 messages to 10 telephone numbers – via landline or cellular communication
If the alarm is triggered, the programmed event text is activated and the message is sent to a maximum of 10 contacts Simultaneous transfer via landline or GSM takes place – as a second communication channel in the event of a network failure. The system recognises the prefix “0” for an outside line, so the call is always sent correctly if an external call is made from a telephone system with an external line.
Worldwide remote access, on-site interaction and inbox function
Remote access via call or SMS allows retrieval of status messages and device programming when you're on the go. Via the listening and speaking mode (microphone/loudspeaker) on-site interaction is possible, e.g. listening in on the property or talking through the loudspeaker. Practical: Incoming SMS are forwarded via the inbox function – e.g. credit running out on a prepaid SIM card.
Stand-alone operation, 4 output switches
The dialer not only processes alarm system signals via the wired inputs, but also from external devices. In addition it not “only” sends telephone calls, but also controls other equipment via 4 output switches – e.g. for building management systems or industrial use.

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.
Copyright © Office Danmark · Alle Rettigheder Forbeholdes.