Vælg venligst erhverv eller privat
Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her

Hurtig levering

95% af alle ordrer leveres fra dag-til-dag

Fri fragt

Fri fragt på alle ordrer over 499 excl. moms

+30.000 produkter

Stort udvalg af markedets bedste produkter.


Tom Indkøbskurv

CISCO Physical Access Input Module

Forsiden CISCO Physical Access Input Module
CISCO Physical Access Input Module (CIAC-GW-IP10)

CISCO Physical Access Input Module

Varenr.:
CIAC-GW-IP10
  • Produkt Diverse
4.200,-
3.360,- ekskl. moms
Beskrivelse

Cisco Physical Access Input Module


CIAC-GW-IP10

The Cisco® Physical Access Input Module is an optional module that can be connected to the Cisco Physical Access Gateway to expand the solution to include additional inputs.

The Cisco Physical Access Input Module can connect up to 10 inputs, each of which can be configured as supervised or unsupervised. The module must be used in conjunction with a Cisco Physical Access Gateway, and cannot be used standalone.

Cisco Physical Access Input Module Connectors

Connector

Description

Inputs

10 inputs, each of which can be configured as supervised or unsupervised.

Tamper Input

Unsupervised input; raises a "tamper" alarm when activated. Can be repurposed for general use by software configuration.

Power Fail Input

Unsupervised input; raises a "power fail" alarm when activated. Can be repurposed for general use by software configuration.

Power

2-pin connector for connecting a 12 to 24 VDC external power source.

CAN Bus

A 3-wire connection is used to connect to the Controller Area Network (CAN) bus.

CAN Termination

A switch allows for the CAN bus to be terminated. This is needed for the last module on the CAN bus.



Specifications

Item

Description

Housing

Aluminum

Dimensions (LxWxH)

• 5 x 7 x 1.46 in.
• 127 x 178 x 37 mm

Weight

Without Plugs and Brackets

With Plugs

With Brackets

With Plugs and Brackets

1.24 lb (562 g)

1.34 lb ( 630 g)

1.4 lb ( 636 g)

1.5 lb ( 704 g)

Certifications

• FCC
• UL
• CE

Operating Temperature

• Indoors only
• 32 to 122°F (0 to 50°C)

Humidity

5 to 95% relative, non-condensing

Power

12 to 24 VDC (+/- 10%) through an external power supply



Package Contents

Item

Cisco Physical Access Input Module

Connector plugs

Pin

Qty

3

1

2

13

20 resistors (1K) for input supervision

2 mounting brackets, with 4 screws for each bracket

Regulatory compliance and safety information

Quick start guide

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.